What is the onion?

Onion scraper is a mechanical device that is designed to remove the skin from the onion without damaging the underlying onion or grabbing it in a way that causes it to rot quickly. There are very few models intended for use in the home, as the most commonly used mechanisms are relatively large, although machines are the basis of food preparation, production and some kitchens with a high volume. The two most common onion construction for stepping work on the principle of forcing the onion to touch the sharp blades or teeth, which over time completely remove the free outer skin of the onion. One design uses a barrel similar to holding the chamber onion, while the other type uses a screw worm or conveyor belt to move the onion line over a series of blades. Rarely, the individual step can hold one onion and remove the skin with the blade in the same way as the apple jewel works.

The basic concept of most designs for industrial onion juice is that the combinationThe friction, the weight of the onion and the set of small teeth or blades fit to eventually remove the outer and loose skin of the onion. The process requires the onion to move and turn so that each side of the onion passes the teeth or blades. This method is relatively effective and does not damage any damage to the onion in care, which means that peeled Alliums can be stored for a short time after peeling.

The problem of moving the onion over the teeth or the blades in the peeled onion is solved in one design using a hopper similar to the barrel. The hopper is lined with sharp teeth and the onion is loaded in. After activation, the hopper begins to rotate, causing the onion to collapse inside and come into contact with the teeth at different angles. These machines can be susceptible to clogging once the skin is removed.

Another solution is to use a long horizontal screw that constantly rotates. The onion is placed on the screw and moves down the line as if it were on the transport belt. Sharp teeth are placed in differentpoints, so that the onions of the onion were cut off and rotated and rotated with a rotating screw. However, this type of onion is a tendency to be very large and usually works in conjunction with some type of loader.

You can use a single onion, but usually requires that individual onions be specifically loaded into a special holding criminal or orthosis. This peeler works by turning the onion in place while the blade moves from one end to the other and removes the skin. This model works similarly to Apple jewelry, but is not so effective for use on large batches of onions.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?